Husqvarna DT22 Lawn Mower User Manual


 
13
SAFETY INSTRUCTIONS
Disconnect the spark plug cable before repair work.
Maintenance
Never make adjustments with the engine
running.
Disengage the drive units, shut off the
engine and wait until all moving parts come
to a complete stop before making
adjustments, performing maintenance or
cleaning the machine.
Disconnect the spark plug cable before
beginning repair work.
Keep all components in serviceable
condition and make sure all nuts, bolts, etc.
are tight. Replace worn or damaged
decals.
Be careful when checking work tools. Use
gloves when performing maintenance
work.
Never allow persons not trained in the use
of the machine to perform service on it.
Always park the machine on even ground
before performing maintenance or making
adjustments.
Do not disassemble the engine. This can
invalidate your guarantee. Contact your
dealer if you have any questions regarding
service or guarantee matters. Follow all
maintenance instructions.
Do not change the setting of governors and
avoid running the engine with overly high
RPMs. If you run the engine too fast, you
risk damaging the machine components.
Do not modify safety equipment. Check
regularly to be sure it works properly. The
machine must not be run with defective or
disassembled safety equipment.
The muffler is designed to maintain sound
levels at an approved level and keep direct
exhaust away from the user. Exhaust
gases from the engine are extremely hot
and may contain sparks that can cause
fires or burn the user.
Never use a machine with a defective
muffler.
Reduce the risk of fire by removing grass,
leaves and other debris that may have
caught in the machine.
Keep the machine clean.
WARNING!
Wait until all moving parts are completely
still before performing maintenance on
the machine.
Turn off the engine and remove the spark
plug cable.
8011-027
8011-121