Filter
Top Products
Command Reference 9-129
*SAVPM6680B/81/85
_ <Decimal data>
Save
Saves the current settings of the instrument in an internal nonvolatile memory.
Nineteen memory locations are available. Switching the power off and on does not
change the settings stored in the registers.
Note that memory positions 10 to 19 can be protected from the front panel auxiliary
menu. If this has been done, use the :SYSTem:UNPRotect command, then you
can alter these memory positions.
Parameters
<Decimal data> = a number between 1 and 19.
Example:
SEND® *SAV 8 10¿
Complies to standards: IEEE 488.2 1987