Fluke PM6685R Outdoor Timer User Manual


 
9-110 Command Reference
:SYSTem :SET PM6680B/81/85
8 <Block data>
Read or Send Settings
Transmits in binary form the complete current state of the instrument. This data
can be sent to the instrument to later restore this setting. This command has the
same function as the *LRN? common command with the exception that it returns
the data only as response to :SYST:SET?. The query form of this command re
-
turns a definite block data element.
Parameters:
<Block data> is the instrument setting previously retrieved via the :SYSTem:SET? query.
Returned format: <Block data>¿
Where:
<Block data> is #292<92 data bytes> for PM6680B
<Block data> is #3104<104 data bytes> for PM6681
<Block data> is #276<76 data bytes> for PM6685
SEND® :SYST:SET?
READ¬ #2764...-8 .8 .Çä......d...8
+.................-.c-..............88?..............d
Complies to standards: SCPI 1991.0, confirmed.
:SYSTem :TIME :ELAPsed? PM6680B/81/85
Read On-time
Use this command if you want to know (in seconds) how long the counter has
been on.
Returned format:
<String>=Power-on time.
For PM6680B and PM6685, this is the time elapsed since the last power-on.
For PM6681, this is the total elapsed time since the counter was new.