Filter
Top Products
9-116 Command Reference
:TRIGger:COUNt PM6680B/81/85
8 «<Numeric value> | MIN | MAX»
No. of Triggerings on each Ext Arm start
Sets how many measurements the instrument should make for each ARM:STARt
condition, (block arming).
These measurements are done without any additional arming conditions before
the measurement. This also means that stop arming is disabled for the measure
-
ments inside a block.
+
The actual number of measurements made on each INIT equals to:
(:ARM:START:COUN)*(:TRIG:START:COUNT)
Parameters:
<Numeric value> is a number between 1 and 65535.
MAX gives 65535
MIN gives 1
Example:
SEND® :TRIG:COUN 8 50
Returned format: <Numeric value>¿
*RST condition: 1
Complies to standards: SCPI 1991.0, confirmed.