Filter
Top Products
Specifications
DMM Measurements on Meter Inputs
9
97
Diode
Maximum Voltage Reading......................................2.8 V
Open Circuit Voltage.................................................<4 V
Accuracy ...............................................±(2 % +5 counts)
Measurement Current.............................. 0.5 mA, ±20 %
Temperature (TEMP)
With Optional Temperature Probe
Ranges (°C or °F) ................................. -40.0 to +100.0 °
-100.0 to +250.0 °
-100.0 to +500.0 °
-100 to +1000 °
-100 to + 2500 °
Probe Sensitivity ............................1 mV/°C and 1 mV/°F
DC Voltage (VDC)
Ranges.....500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V
Full Scale Reading....................................... 5000 counts
Accuracy ............................................±(0.5 % +5 counts)
Normal Mode AC Rejection at 50 or 60 Hz ±1 % ....>60 dB
AC Voltage (VAC)
Ranges.....500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V
Full Scale Reading.......................................5000 counts
Accuracy
15 Hz to 60 Hz................................. ±(1 % +10 counts)
60 Hz to 1 kHz.............................. ±(2.5 % +15 counts)
For higher frequencies the frequency roll off of the
Meter input starts affecting accuracy.
Normal Mode DC Rejection..................................>50 dB
AC+DC Voltage (True RMS)
Ranges.....500.0 mV, 5.000 V, 50.00 V, 500.0 V, 1100 V
Full Scale Reading.......................................5000 counts
Accuracy
DC to 60 Hz..................................... ±(1 % +10 counts)
60 Hz to 1 kHz.............................. ±(2.5 % +15 counts)
For higher frequencies the frequency roll off of the Meter
input starts affecting accuracy.
All accuracies are valid if the waveform amplitude is
larger than 5 % of full scale.