Filter
Top Products
Fluke 196C/199C
Users Manual
64
Note
For information about installing and using the
FlukeView ScopeMeter software, see the
SW90W Users Manual.
A Software & Cable Carrying Case Kit is optionally
available as model number SCC190.
Connecting to a Printer
To print a screen directly to a printer, use one of the
following adapters:
The Optically Isolated RS-232 Adapter/Cable
(PM9080) to connect a serial printer to the OPTICAL
PORT of the test tool. (See Figure 34.)
The Print Adapter Cable (PAC91, optional) to connect
a parallel printer to the OPTICAL PORT of the test
tool. (See Figure 35.)
Before printing, you must setup the test tool for a specific
printer.
Figure 34. Connecting a Serial Printer
Figure 35. Connecting a Parallel Printer