Filter
Top Products
Fluke 196C/199C
Users Manual
36
10 Select the desired trigger slope,
and jump to Level:
11 Select the 0.12V or 1.2 V trigger
level and accept all recorder
options.
During recording samples are continuously saved in deep
memory. The last nine recorded divisions are displayed
on the screen. Use View All to display the full memory
contents.
Note
To learn more about the Single Shot trigger
function, see Chapter 5 “Triggering on
Waveforms”.
Figure 20. Triggered Single Sweep Recording
Analyzing a TrendPlot or Scope Record
From a Scope TrendPlot or Scope Record you can use
the analysis functions CURSORS and ZOOM to perform
detailed waveform analysis. These functions are
described in Chapter 4: “Using Replay, Zoom and
Cursors”.