Filter
Top Products
Dimension One Spas - Bay Collection - Owner’s Manual
18
Dynamic Massage Sequencer
The Dynamic Massage Sequencers control the jets in the lounge areas to sequentially massage
different muscle groups. When selecting a massage sequence, the human figure on the control
panel displays corresponding lights, allowing a preview of that sequence before starting it.
The Dynamic Massage Sequencer Control Panel
Light Button
The Light Button on the Dynamic Massage Sequencer works just like
the one on the Control Panel to turn the spa light on and off.
See page 12 for light operation information.
Jets Button
The Jets button on the Dynamic Massage Sequencer turns the jet pump
associated with the Sequencer on or off. The same spa jet pump jet may
be turned on or off using the button on the Control Panel.
Speed Button
The Speed button changes the amount of time between each step of the
massage sequence (the default time is 5 seconds). Push the Speed button
once to change it to 15 seconds, again to change it to 30 seconds. A
third push will return it to 5 seconds. The status light below the Speed
button will blink at the current speed.
Start/Stop Button
Press the Start/Stop button to start a massage sequence or pause one
already underway. Pause does not stop the massage.
For example:
If you want to massage any particular zone for a long
time, press the Start/Stop button when the massage is working on that
zone, and the system will remain there until the button is pushed again.
While paused, the lights on the human figure show the current massage
pattern. To preview other patterns while in pause mode, press the
Sequence button.