Filter
Top Products
5
SECTION I. INTRODUCTION
This section will familiarize you with the components of the Model 190-302 — 42” Blade Attachment.
Select a firm and level surface that is large enough to accommodate both the Front Blade assembly and the tractor
when installing the blade. Carefully remove the front blade assembly, sub components, and hardware pack from the
shipping container. Refer to Figure 1 to confirm that all parts are present and to acquaint yourself with the part
descriptions. Throughout the manual the parts shown in Figures 1 will be identified by name, followed by their callout
number in parenthesis, to aid in assembly and installation.
NOTE: Some components may have been further pre-assembled at the factory
Figure 1
REF.
NO.
PART
NO. DESCRIPTION QTY.
1 N/A Blade Assembly, w/Pivot Cable attached 1
2 746-3059A Pivot Cable Assembly 1
3 747-3240 Blade Lift Rod 1
4 10991 Adjustment Clevis 1
5 N/A Handle Support Tube Assembly 1
6 N/A Blade Pivot Handle Assembly 1
7 711-3401 Rod, .5 x 12.5 Lg. 1
8 603-0271 Lift Bracket 1
9 711-0654 Clevis Pin 1
10 710-0505 Hex Cap Screw, 7/16-14 x 1.0 GR5 2
11 736-0407 Belleville Washer, .45 x 1.0 x .062 2
12 712-3004A Hex Flange Locknut, 5/16-18 2
13 710-3180 Hex Cap Screw, 5/16-18 x 1.75 GR5 2
14 714-0147 Internal Cotter Pin 4
15 712-0431 Hex Flange Locknut, 3/8-16 1
16 738-0234 Shoulder Screw, 1/2 x .29; 3/8-16 1
17 712-0127 Flat Nut, 10-24 1
18 710-1233 Oval Hd. Cntsk. Screw, 10-24 x 1.375 1
19 725-0157 Cable Tie 3
1
2
3
4
5
6
8
7
9
10
11
12
13
14
15
16
17
18
19