Filter
Top Products
14
SECTION VI. ADDITIONAL ACCESSORY REQUIREMENTS
A. WEIGHT KIT
This section describes the proper configuration of the
required weight kit, Model 307.
WARNING
The weight kit, Model 307, must be installed on
the rear of the tractor whenever the blade
assembly is installed on the front of the tractor.
In addition, the weight kit must be used with the
proper weights.
1. At all times that the blade is installed on the front
of the tractor, the weight kit must be installed on
the rear of the tractor. The weight kit
counterbalances the weight of the blade and
provides stability to the tractor.
2. Depending upon the prevailing conditions, a
minimum of two suitcase weights and a maximum
of four weights must be used with the weight kit.
3. Refer to the weight kit Owner’s Manual for detailed
instructions pertaining to the proper installation of
the weight kit onto the rear of the tractor.
B. TIRE CHAINS
Tire chains are recommended when using the 42 inch
Spring Trip Blade. Tire chains are available at your
authorized Cub Cadet Dealer.