Filter
Top Products
4
5. Never allow children to operate the machine.
6. Use extra care when approaching blind corners,
shrubs, trees or other objects that may obscure
vision.
IV. SERVICE
1. Use extra care in handling gasoline and other
fuels. They are flammable and vapors are
explosive.
a. Use only an approved container.
b. Never remove gas cap or add fuel with the
engine hot or running. Allow engine to cool at
least two minutes before refueling. Wipe dry
any spilled fuel. Do not Smoke.
c. Never refuel the machines indoors.
d. Never store the machine or fuel container
inside where there is an open flame or spark,
such as a water heater, space heater or similar
appliance.
2. Never run a machine inside an enclosed area.
3. Check frequently and keep nuts and bolts tight and
equipment in safe working condition.
4. Never tamper with safety devices. Check their
proper operation regularly. Use all guards as
instructed.
5. To reduce fire hazard, keep machine free of grass,
leaves or other debris build-up. Clean up oil or fuel
spillage. Allow machine to cool before storing.
6. Stop and inspect the equipment for damage if you
strike an object. Repair, if necessary, before re-
starting and operating the machine.
7. Never make adjustments or repairs with the
engine running.
8. Check brake operation frequently. Adjust and
service as required.
9. Muffler, engine, and belt guards become hot
during operation and can cause a burn. Allow to
cool down before touching.
10. Do not change the engine governor settings or
overspeed the engine.
11. If the machine should begin to vibrate abnormally,
stop engine and check immediately for the cause.
Abnormal vibration is a warning of trouble.
Danger: This equipment was built to be operated according to the rules for safe operation in this manual.
As with any type of power equipment, carelessness or error on the part of the operator can result in serious
injury. If you violate any of these rules, you may cause serious injury to yourself or others.
TO THE OWNER
The 42-inch Front Blade Attachment, Model Number 302, is designed for use on Cub Cadet Series 2000 Tractors.
The blade may be used for moving snow, terracing or grading operations.
Please keep this manual. The instructions in this manual explain the minor assembly required; installation and sea-
sonal removal; and the adjustment and operating procedures for the blade. Read this manual carefully to familiarize
yourself with the equipment before you install and utilize the front blade.
Read and observe all WARNING and CAUTION statements. They are included to provide for the protection of the
equipment installer and user, and to ensure prolonged service life of the equipment.
WARNING: To increase traction and stability of the tractor when using the front blade attachment, the
rear weight bracket with a minimum of two suitcase weights should be installed on the tractor. The Rear
Weight Bracket Kit is available as kit number 190-307-100, which includes only the bracket and mount-
ing hardware. The individual 42 pound suitcase weights can be ordered under part number 759-3389.
NOTE: References to LEFT and RIGHT indicate the left and right sides of the tractor when facing forward in the
driver’s seat, unless specifically instructed to reference from a different position on the tractor. Reference to
the FRONT indicates the grille end of the tractor; to the REAR indicates the draw bar end.
If you have difficulties with the attachment, have questions regarding the operation or maintenance
of your equipment, or desire additional information not found in the manual, contact your dealer. If you
need help locating a dealer in your area, contact the Customer Dealer Referral Line by calling:
1-877-282-8684