Filter
Top Products
MAINTENANCE SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE SERVICE DATES
CheCk Brake O_Uorl
Check Tire pro'_u_ V _
Check Operator Presence and
T Intelt_k Systems II_
CheCk I0¢LoOSeFasteners ll_ I_z I_
A Sherper_ReplsceMowerBktde= I1_,
T Check Battery Level
R G lean Battery and Terminals I1_ V r
Check Transaxle Cooling li_
Adjust B_de Belt(s) TenSion It#/!
Adjust MOUOnDflve Belt(s) Tens)on _a
Check Engine OII Level _
Change En_ne Oil _=.: I_'
E Clean Air Filter 11_2
N CleanAirScreen IkS2
Insp_:t Muffier/Spark Artester _1_
Replace 011FiJier(if equipped) t1_12
N CJea. Ef_no Cooling FIns 11_2 i
! ReplaCe Spark Plug I_
Rep_itce Ak Filter Paper Catlddge _2
Rep_e Fuel F_lt_- I_
GENERAL RECOMMENDATIONS
The warranty on this tractor does notcover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty,operator must maintain
tractor as instructedin thismanual,
Some adjustments will need to be made
periodicallyto pmpedy maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual should
be checked at least once each season.
• Once a year you should replace the
spark plug,clean or replace air filter, and
check blades and belts for wear. A new
spark plug and clean air filterassure
proper air-fuel mixture and help your
engine runbetter and lastlonger.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
Spindle -(_ Spindle
Zerk Zerk
_Front Wheel
Beadng BeadngZerk
Zerk
i
(_)SAE 30 or 10w30 MOTOR OIL
_)REFER TO Maintenance *ENGINE" SECTION
IMPORTANT: Do not oil or grease the
_ivot points which have special nylon
earings. Viscous lubricants will attract
dust and dirt that will shorten the life of
the self-lubricating bearings. If you feel
they must be lubncated, use only a dry,
powdered graphite type lubricant
sparingly.
18