Filter
Top Products
,_CAUTION: Before pedorming any service or adjustments:
• Depress clutch/brake pedal fully and set parking brake.
• Place motion control lever in neutral (N) position.
• Place attachment clutch in "DISENGAGED" position.
• Turn ignitionkey "OFF" and remove key.
* Make sure the blades and all moving pads have completely stopped.
• Disconnect spark plug wire from spark plug and place wire where it cannot come
in contact with plug.
TO REMOVE MOWER
Mowerwillbe easierto removefromthe
rightsideoftractor.
• Placeattachmentclutchin=DISEN-
GAGED"position.
• Moveattachmentliftleverforwardto
lowermowerto itslowestposition.
• Rollbelt offenginepulley.
• Disconnectclutchrodfrom clutchlever
by removingretainerspring.
• Disconnectanti-swaybarfrom chassis
bracketby removingretainerspring.
• Disconnectsuspensionarms from rear
deckbracketsby removingretainer
spdngs.
Clutch Lever
Clutch
Suspension Arms
• Disconnectfrontlinksfromdeckby
removingretainersprings.
• Raiseliftleverto raisesuspension
arms.Slidemoweroutfrom undertrac-
tor.
IMPORTANT: Ifan attachmentotherthan
the mowerdeckis tobe mountedonthe
tractor,removethe frontlinks.
TO INSTALLMOWER
• Raiseattachmentliftleverto itshighest
position.
• Slidemowerundertractorwithdis-
chargeguardtorightsideoftractor.
• Lowerliftleverto its lowestposition.
• Installmowerin reverseorderof
removalinstructions.
Retainer
Spring
EnginePulley
Front Link
Retainer
Spring
Anti-Swaybar
RetainerSpdngs
(BothSides)
Retainer Springs
(Both Sides)
SuspensionArm
22