Filter
Top Products
ENGINETECHNICALINFORMATION
This is a single cylinder, L=head,air cooled engine. It is a low
emissions engine.
Intl_eStateof Caiifornia, Model 120000 enginesare certified
by the California Air Resources Boardto meetemissions
standardsfor 125 hours. Such certification does not grant
the purchaser, owner or operator of this engine any
additional warranties with respectto the performance or
operational iife of this engine.Theengine is warranted soiely
according to the product and emissions warranties stated
elsewherein this manual.
Pewer Ratings
Thegross power rating for individual gas engine models is
labeledin accordancewith SAE(Societyof Automotive
Engineers)codeJ1940 (SmalI Engine Power & Torque
Rating Procedure),and rating performance hasbeen
obtained andcorrected in accordancewith SAEJ1995
(Revision2002-05). Torquevalues arederived at3060 RPM;
horsepower vaiues arederivedat 3600 RPiVI.Actuai gross
engine power wiii beiower and is affected by, among other
things, ambient operating conditions and engine-to-engine
variabiiity. Givenboth the wide array of products on which
enginesare piacedand the variety of environmentai issues
appiicabteto operatingthe equipment, the gas engine wiii not
developthe ratedgross power when used in agiven pieceof
power equipment (actual "on-site"or net power). This
difference is due to avariety of factors including, but not
limited to, accessories (air cteaner,exhaust,charging,
cooiing, carburetor, fuel pump, etc.), appiication iimitations,
ambient operating conditions (temperature,humidity,
altitude), and engine-to-engine variabiiity. Dueto
manufacturing and capacityiimitations, Briggs & Stratton
maysubstitute an engine of higher ratedpower for this
Seriesengine.
PRODUCTSPECiFiCATiONS
PressureWasher Specificatbns
Max Outbt Pressure ....................... 2,550 PSi
Max FtowRate............................. 2.3 GPM
ChemicatMix......................... Use asdirected
Water SupplyTemperature .......... Not to exceed IO0°F
Shipping Weiglst............................. 72 Ibs.
Engine Specifications
Bore ................................. £69 in. (68mm)
Stroke ............................... £04 in. (52rnm)
Displacement ........................ 11.57in. (190 cc)
SparkPlug
Type: ............. Briggs & Stratton 802592 or 5095D
SetGapTo: ...................... O.030inch(O.76rnm)
ArrnatureAir Gap: ........... 0.006=0.010in.(O.15=O.25mm)
Valveclearancewithvalvespringsinstalledand piston1/4in,
(6 turn)pasttopdeadcenter(checkwhenengineiscold),
Intake.................... 0.005=0.007in.(0.13=0.18ram)
Exhaust .................. 0.007=0.009in.(0.18=0.23rnrn)
FuelCapacity............................... 1.6Quarts
OilCapacity........................ 18Ounces(0.5 liter)
NOTE:For practicai operation, the engine ioad should not
exceed 85% of rated power. Enginepower will decrease
3-I/2% for each1,000 feet (300 meters) abovesea Ieveiand
1% for each 10° F(5.6° C) above77° F(25° C). It should
operatesatisfactorily at an angle up to 15°,
15