Filter
Top Products
3. Beforeconnectinggardenhosetowaterinlet,inspect
inletscreen(A).Cleanscreenifitcontainsdebrisorhave
it replacedif damaged.DONOTrunpressurewasher if
inlet semen is damaged or missing.
.
Run water through gardenhose for 30 secondsto flush
it of debris. Turn off water.
IMPORTANT:DO NOTsiphon standingwater for the water
supply. UseONLYcold water (less than 100%).
5. Connectgarden hose (not to exceed50 feet in length) to
water inlet. Tighten by hand.
Using a OneWay Valve(vacuum breakeror check valve)at
pump inlet cancause pump or inlet connector damage.
ThereMUSTbeatleasttenfeetof unrestrictedgardenhose
betweenthe pressurewasherinletandanydevice,suchasa
vacuumbreakerorcheckvalve.
Darnageto equipmentresultingfrom failuretofollowthis
instructionwillvoidwarranty.
6. Turn ONwater, point gun in a safe direction and squeeze
trigger to purge pump system of air and impurities.
WARNING
::_ Riskof eyeinjury.
_Spray cansp ash back or propel objects.
Alwayswearsafetygoggleswhenusingthis equipmentor in
vicinityof whereequipmentisin use
Beforestartingthepressurewasher,besureyouarewearing
adequatesafetygoggles
NEVERsubstitutesafetyglassesfor safetygoggles
Checklist Before Starting Engine
Reviewthe unit to ensureyou have performed atl of the
following:
1. Besure to read SafetyRulesand Operationsections
before usingthe cleaning system.
2. Makesure handle is in placeand secure.
3. Checkthat oii has beenadded to proper levelin engine
crankcase.
4. Add proper fuelto fuel tank.
5. Checkfor proper hoseconnections (high pressure and
water supply) and that there are no kinks, cuts, or
damageto the high pressure hose.
6. Provideproper water supply (not to exceedlOB°F).
10