Craftsman 580.75213 Pressure Washer User Manual


 
ENGINEMAINTENANCE
WARNING
Unintentionalsparking can result in fire or
electric shock.
WHENADJUSTINGORMAKINGREPAIRSTOYOUR
PRESSUREWASHER
* Disconnectthesparkplugwirefromthesparkplugandplace
thewirewhereitcannotcontactsparkplug.
WidENTESTINGFORENGINESPARE
* Useapprovedsparkplugtester.
o DONOTcheckfor sparkwith sparkplugrernoved.
ell
eli Recommendations
NOTE:Usea high quality detergent oii classified "For Service
SF,SG,SH, SJ" or higher. DONOTusespecialadditives.
1= Choosea viscosity according to the tabb below:
104 F r_
86
68
50
32
14
4
-22
40 C
o 30
20
10
.(.3 --
-10
-20
-30
NOTE:Synthetic oii meeting iLSACGF=2,APIcertification
markand APi service symboi with "SJ/CF ENERGY
CONSERVING"or higher, is an acceptableoii at aii
temperatures. Useof synthetic oil does not alter required oil
changeintervals.
SAE30: 40°Fand higher (5°C and higher) isgood for aii
purpose useabove40%, usebelow 40°F will cause hard
starting.
18W-30:0 to IO0°F(=18to 38°C) is better for varying
temperatureconditions. This viscosity improves cold weather
starting, but may increaseoil consumption above80%
(27%).
*Check oii bvet frequently at higiler temperatures.
Synthetic 5W-30:=20 to 120°F(=30to 40 °C) providesthe
best protection at ali temperatures as weil as improved
starting with iess oii consumption=
5W-30: 40°F and below (5°C and be/'ow)is recommendedfor
winter useand works bestin cold conditions=
CheckingOil Level
OiIlevelshould be checkedprior to each useor at least every
5 hours of operation. Keepoii ievei maintained.
1. Makesure pressure washer is on a ieveisurface=
2= Removeoii dipstick and wipe dipstick with cleancioth=
Reptaceand tigilten dipstick. Removeand and check oil
levei.
3. Verify oii is at "FuIF mark on dipstick. Replaceand
tigilten dipstick.
Adding EngineOil
1= Makesure pressure washer is on a Ieveisurface.
2. Checkoii ievei as described in CheckingOffLevel
3. If needed,siowiy pour oil into oil fiii openingto the
"Full" mark on dipstick. DONOToverfill.
Overfilling with oil may causethe engineto not start, or
hard starting.
DONOToverfill.
IfovertheFULLmarkon dipstick,drainoffto reduceoil levelto
FULLmarkon dipstick.
4. Replaceand tigllten dipstick.
ChangingEngineOil
Changeengine oii after the first 5 hours and every 50 hours
thereafter, if you are usingyour pressurewasher under
extremeiy dirty or dusty conditions, or in extremely hot
weather, changeoil more often.
CAUTION
Avoid prolonged or repeatedskin contact with used motor
oil.
Usedmotoroil hasbeenshownto causeskincancer[ncertain
laboratoryanimals
Thoroughlywashexposedareaswith soapandwater
KEEPOUTOFREACHOFCHILDREN.DON'T
POLLUTE.CONSERVERESOURCES.RETURN
USEDOILTOCOLLECTIONCENTERS.
Changeeli while engine isstill warmfrom running, as
follows:
1. Drainfuel tank by running pressurewasher until fuel
tank is empty.
2. Disconnectspark plug wire and keepit awayfrom spark
plug.
18