Filter
Top Products
Atria
™
20
Installing the Halogen Bulbs
NOTE: Do not remove the protective sleeve on
the halogen bulbs. Touching the glass casing of
a bulb may damage or break the glass.
4 Cut the plastic sleeve on the halogen bulb to
expose the connection end of the bulb. Continue to hold
the bulb by the sleeve during installation. Install both
halogen bulbs into the light fixture. Please throw away
the plastic sleeve after installing the halogen bulbs.
CAUTION: Ñ Only use maximum 50-watt
halogen bulbs!
Attaching the Glass Shade
5 Insert the threaded rod from the light fixture
through the hole in the center of the glass shade.
6 Thread all pieces of the finial onto the threaded
rod. Screw the finial into place securely.
STEP 5
STEP 6
Installed fan
and light
fixture
STEP 4
Halogen bulbs