Filter
Top Products
Atria
™
10
Attaching the Canopy
4 To install the canopy hardware, set aside the canopy
hatch and one canopy hatch screw and lock washer. You
will install the canopy hatch in the next section. Attach the
canopy to the crossbar mounting bracket with three of the
canopy screws and lock washers. Using the screwdriver
provided, tighten each screw until the canopy hardware
is mounted firmly to the crossbar mounting bracket.
NOTE: On a sloped ceiling, align the canopy
opening with the top or peak of the room.
STEP 5
Canopy screws (3)
Lock washers (3)
Canopy
Canopy hatch
NO DRILL