Filter
Top Products
Atria
™
18
Installed blade assemblies
3 Assemble the blade irons, blades, and blade
iron plates. Place the blade iron on top of the blade
and the blade iron plate underneath the blade. Use
a manual screwdriver and the blade iron plate screws
to secure the blade assembly. Use four screws per
blade. Repeat this process for each fan blade.
CAUTION: Ñ Do not use an electric
screwdriver to assemble fan blades!
Attaching
4 Install the assembled blades to the blade iron
support ring using 10 blade iron screws (use two screws
for each blade assembly). Align the screw holes on the
blade irons with the screw holes on the blade iron support
ring. Tighten the screws with a manual screwdriver.
CAUTION: Ñ Do not operate the fan at
this point. Installation must be completed
before turning on the fan.
Blade iron
Blade iron
support ring
Blade iron
screws (2)
Fan blade assembly
Blade iron plate screws (4)
STEP 3
STEP 4
Blade irons (5)
Blades (5)
NO DRILL