Filter
Top Products
4-44
435/485/535
F4-90
F4-89
Operation 58
Check the Transmission Mounts
Check the rubber transmission mounts and mounting
hardware for condition and torque on both the
Synchromesh and powershift transmissions.
Synchromesh transmission
The Synchromesh transmission is held in the front
frame of the tractor by four bottom mounts (1) and two
top mounts (2). Inspect the mounts for deterioration
and wear. Torque the lower mounting bracket bolts
(3) to 224 N
.
m (165 ft-lbs) and the upper mounting
bracket bolts (4) to 397 N
.
m (293 ft-lbs). Torque the
mount bolts (5) to 280 N
.
m (205 ft-lbs).
1407 Twindisc Powershift transmission
The 1407 Twindisc Powershift transmission is held
in the front frame of the tractor by four bottom
mounts (6) and two top mounts (7). Inspect the
mounts for deterioration and wear. Torque the lower
mounting bracket bolts (8) and the upper mounting
bracket bolts (9) to 224 N
.
m (165 ft-lbs). Torque the
mount bolts (10) to 280 N
.
m (205 ft-lbs).
CAT TA22 Powershift transmission
The CAT TA22 Powershift transmission is held in the
front frame of the tractor by four bottom mounts (11)
and two top mounts (12). Inspect the mounts for
deterioration and wear. Torque the lower mounting
bracket bolts (13) and the upper mounting bracket
bolts (14) to 224 N
.
m (165 ft-lbs). Torque the
mount bolts (15) to 280 N
.
m (205 ft-lbs).
If the transmission mounts require replacement,
contact your Buhler Versatile dealer.
2
5
4
1
3
5
6
8
9 7
10
10
F4-104
F4-89
F4-90
Section 4 - Lubrication & Maintenance
Every 1500 Hours or Yearly
F4-104
15
11
13
1214
15