Filter
Top Products
4-32
435/485/535
Section 4 - Lubrication & Maintenance
Every 500 Hours
F4-47
F4-46
WARNING
AVOID POSSIBLE
INJURY OR DEATH
Do not start engine by shorting
across starter terminals. Engine can
start and machine can move when
starting safety switch is by-passed.
Start engine only from operator’s
seat with transmission in neutral and
the parking brake applied
Operation 39
Clean the Hydraulic Suction Screen
The hydraulic suction screen (1) is located in the rear
of the hydraulic oil reservoir tank.
Remove the drain plug (2) and drain the hydraulic oil
from the hydraulic oil reservoir tank before removing
the suction screen.
To remove the suction screen, first clean the top of the
tank where the hydraulic hose attaches to the suction
screen port.
Unscrew and remove the hose (3).
Unscrew and remove the suction screen (1).
Cover the open fitting (4) to prevent contaminants
entering the tank.
Use a cleaning solvent to wash any debris from the
suction screen.
Reinstall the suction screen (1) into the tank and
tighten securely. Reinstall the hose (3) into suction
screen and tighten securely.
Refit the drain plug (2) tighten securely.
Torque Value: 81 N·m (60 ft-lbs)
Wrench size: 1¼" (1.250")
Refill the hydraulic oil reservoir tank to the correct
level.
1
3
3
1
4
F4-45
2