Filter
Top Products
435/485/535
4-39
Section 4 - Lubrication & Maintenance
Every 1000 Hours
F4-54
F4-53
Inspect the seal (1) on both new elements before
installing. Cracks or chips in the element sealing
rubber indicate that the element is defective and
must be replaced.
Install the elements into the canister. Be sure that
the seal on the end of the filters fully contacts the air
cleaner body. The wing nuts (2) have a small seal (3)
on the inner face which should be in good condition
before the wing nuts are tightened. If the seals (3)
are damaged, replace them. Tighten the wing nuts
securely.
Replacement outer (Primary) element P/N: 86034042
Replacement inner (Safety) element P/N: 86034041
NOTE: Replacement elements can be obtained from
your Buhler Versatile dealer.
1
2
3