Filter
Top Products
6
ASSEMBLYPROCEDURES
Grasscatcher
Fitting the Grasscatcher
•Stop the engine.
•Raise the rear flap. Locate the grasscatcher tongue over the rear axle and insert the
grasscatcher under the rear flap.
• Lower the rear flap to retain the grasscatcher .
STOP the engine before fitting or removing the grasscatcher.
Handle Knobs/Toggles
Mowers will have either knobs or toggles to fix the handles in position. Refer to the
instruction below which is specific to your particular model.
•Tighten the handle knobs to secure the upper handle to the lower handle.
• Flip the handle toggles to secure the upper handle to the lower handle.
When folding or unfolding the handles, ensure that the starter switch
lead is not caught or stretched (Keystart models only).
Never use the mower unless the grasscatcher and/or the rear
flap are correctly assembled and fitted.
Assembly_Operating K6 final.qxd 8/12/04 1:33 PM Page 9