Maintenance Chart
Refer to the following table for routine
maintenance.
Time Period
Features Requirements
Lawnmower Visual inspection (leaks)
••
Throttle lever Check operation
•
Remote Air filter hose Check
••
Cutting System Inspect and check assembly
•
(Blades)
Replace
••
Rear flap Inspect and check assembly
••
Chassis Check for buildup of grass
•
Clean
•
Replace
•
Air filter Check
•
Clean
•
Replace
••
Engine Cylinder fins Clean
••
Spark plug Replace
••
All accessible fasteners Check
•
Retighten
•
Engine mounting bolts Check & retighten
•
Mulching plug Inspect and check assembly
••
Muffler Inspect
••
Replace
••
Grasscatcher Check
•
Clean
•
Replace
•
Before carrying out maintenance, STOP the engine, disconnect the
spark plug lead from the spark plug and wedge it between the
cylinder head fins. Remove the starter key from the ignition switch of
Keystart models and disconnect the battery.
Never attempt maintenance that is not outlined in this manual. All
repair work must be carried out by a VICTA Authorised Service
Centre.
Before start
After finish
Refuelling
Weekly
Monthly
If faulty
If damaged
As required
15
Assembly_Operating K6 final.qxd 8/12/04 1:33 PM Page 18