Briggs & Stratton Electric Lawnmower Lawn Mower User Manual


 
2
Safety Instructions
Transporting the mower
•Turn the engine off, by moving the throttle lever to the 'STOP' position and switching the
fuel tap off (where fitted).
Disconnect the spark plug lead and wedge it between the cylinder head fins.
•Do not transport the mower in a vehicle if there is fuel in the fuel tank.
Remove the starter key and disconnect the battery (Keystart models only).
Before using the mower
Do not start the mower until you have studied the instruction manuals.
Know the mower controls. Learn how to stop the engine quickly in an emergency by
moving the throttle to the 'STOP' position.
Before using the mower, ensure that the blade assembly is not worn or damaged.
Always replace worn or damaged blades and bolts in sets to preserve correct balance.
Damaged or worn blades and bolts are major hazards. Use genuine VICTA spare parts
only.
Please note blades are tucked under blade disc for safety and transport reasons
before use. Once the engine is started they will relocate themselves for cutting.
Check all fasteners regularly. Always ensure the mower is in a safe operating condition.
Check for grass build up around the engine and muffler which may cause overheating
and/or a fire hazard.
Do not start the engine unless the rear flap and/or grasscatcher are securely in position.
Operating the mower
Do not mow while people or pets are in the vicinity of the mower or within the mowing
area. Ensure that bystanders are a minimum of 15 metres away.
Do not mow in bare feet or open shoes. Wear long trousers and heavy footwear.
•Make sure the lawn is clear of sticks, stones, bones, wire and debris before mowing.
These could be thrown by the blades and cause injury or damage.
•Start the engine carefully with feet well clear of blades. Do not tilt the mower when
starting the engine.
Stop the engine whenever you leave the mower, even for a moment.
Mow only in good daylight.
Keep hands and feet away from r
otating parts beneath mower when engine is running.
Do not over speed the engine or alter the governor settings. Excessive engine speed is
dangerous and shortens mower life.
Assembly_Operating K6 final.qxd 8/12/04 1:33 PM Page 5