Filter
Top Products
5
Safety Decals
For your safety and the safety of others,
various safety and operational decals are
located on your unit (see Figure 1-2 be-
low).
Keep the decals clean and legible at all
times. Contact your local service dealer or
the factory for replacements if any decals
are damaged or missing.
Refer to the Parts List in this manual for
decal locations, part numbers and ordering
instructions.
Figure 1-2: Location of Safety and Operating Decals
Tine Warning
Control Description
(on Control Panel)
Starting Stabilization
Message (on engine)
Warning Messages
(on tine hood)
Hot Surfaces⁄Moving Belts
Warning (on belt cover)
Operating Symbols
Various symbols (shown here, with word descriptions)
may be used on the tiller and engine.
NOTE: Your unit may not have all of the symbols.
FAST SLOW STOP TILLER DIRECTION LEVER DIRECTION
ROTATING TINES
REVERSE
R
CHOKE
OFF
CHOKE
ON
WARNING
TO AVOID SERIOUS INJURY:
• READ THE OPERATOR’S MANUAL.
• KNOW LOCATIONS AND FUNCTIONS OF ALL CONTROLS.
• KEEP ALL SAFETY DEVICES AND SHIELDS IN PLACE AND WORKING.
• NEVER ALLOW CHILDREN OR UNINSTRUCTED ADULTS TO OPERATE TILLER.
• SHUT OFF ENGINE AND DISCONNECT SPARK PLUG WIRE BEFORE MANUALLY UN-
CLOGGING TINES OR MAKING REPAIRS.
• KEEP BYSTANDERS AWAY FROM MACHINE.
• KEEP AWAY FROM ROTATING PARTS.
• USE EXTREME CAUTION WHEN REVERSING OR PULLING THE MACHINE TOWARDS
YOU.