Filter
Top Products
GB - 10
Check Track Tension (926021, 022, 023)
Check tracking of unit with the differential locked, and
tension of tracks (see Track Tension Adjustment
(926021, 022, 023) on page 29).
Check Auger Gearcase Oil
Check oil level in auger gearcase (see Check Auger
Gearcase on page 20).
Check Engine Crankcase Oil
IMPORTANT: The engine is shipped with 5W-30 oil in
crankcase. Refer to Engine Manual for detailed
instructions.
Fill Engine Fuel Tank
Refer to Engine Manual for proper fuel type and tank
capacity.
Check Function of all Controls
Ensure unit runs and performs properly. Refer to
OPERATION on page 13.
Run-in Attachment Belt
1. Start unit in a well-ventilated area according to
Starting and Shut Off on page 17.
2. Engage attachment clutch lever and run
attachment for about 15 minutes.
3. Stop unit, wait for all moving parts to stop, and
remove spark plug wire.
4. Adjust belt finger, if necessary. See Check Belt
Finger Clearance on page 26
5. Adjust clutch idler according to Attachment
Clutch/Brake Adjustment on page 24.