Filter
Top Products
GB - 30
3. With the attachment clutch disengaged,
check that the attachment idler arm
lightly touches the frame. See Figure 33.
4. Tighten jam nut on the adjustment
barrel.
Check Attachment Idler Arm Roller
Clearance
NOTE: It will be difficult to check the
measurement inside the frame. Use a 1/2 in.
(12.7 mm) minimum spacer as a gauge to
check the clearance between the roller and
the frame.
1. With the clutch lever engaged, check the
clearance between the frame and plastic
roller on the lower end of the attachment
idler arm. See Figure 34.
• If roller is 1/2 in. (12.7 mm) or more
from frame, go to Adjust the
Attachment Clutch Cable Spring
Extension on page 31.
• If roller is less than 1/2 in. (12.7 mm)
from frame, loosen idler adjustment
nut and move idler closer to the belt.
Tighten adjustment nut and recheck
the roller clearance.
Figure 32
1. Attachment Clutch Cable
2. Adjustment Barrel
3. Jam Nut
2
3
OS7185
1
OS7191
Figure 33
OS7196
With the attachment clutch
disengaged, check the
attachment idler arm position
here. The attachment idler arm
should lightly touch the frame.
Figure 34
OS7189
Some components removed for clarity
of illustration.
Roller should be a minimum of
1/2 in. (12.7 mm) from the
frame when the attachment
clutch is engaged.
1. Idler Adjustment Nut
2. Attachment Idler Arm
3. Roller
4. Frame
1
2
3
4