Filter
Top Products
Aquatic Industries, Inc.
25
The whirlpool action may cause even small amounts of bubble bath or shampoo to foam excessively. Exercise
moderation in experimenting with different soap products.
No servicing of this product should be done by the user. There are no user serviceable parts. All controls
are located in the control recesses on the lip of the tub. These are the only controls that should be used by
Motors are self-lubricating -- No lubrication required.
and television reception. It has been type tested and found to comply with the limits for a class
B computing device in accordance with the specifications in subpart J of part 15 of the FCC
-
of the following measures:
circuits.
technician for additional suggestions.
This booklet is available from the U.S. Government Printing Office, Washington, DC 20402,
Stock No., 004-000-00345-4.
WHIRLPOOL USER INFORMATION
PLEASE NOTE:
FCC CONSUMER INFORMATION
Electrical Installation Information Listed on page 11.
Serial Number Location
The tub model and serial numbers are located above
the pump area on the backside of the bathtub.
Your installer should have a service access panel
in this location.