Filter
Top Products
Aquatic Industries, Inc.
10
ROUGH-IN MEASUREMENTS:
INSTALLATION INSTRUCTIONS
MODEL A B
(From center of overflow pipe (From center of
to outside rim) drain to tub rim)
PLEASE NOTE: THE MANUFACTURER ACCEPTS A 1/4” VARIANCE. THERE ARE
VARIATIONS ON EACH TUB AND SPECIFICATIONS ARE SUBJECT TO CHANGE AS WE
IMPROVE UPON OUR PRODUCT AS REQUIRED.
THE DIMENSIONS NEEDED FOR SITE PREPARATION AND STRUCTURE BUILDING
WILL DIFFER; AQUATIC INDUSTRIES, INC. ASSUMES NO RESPONSIBILITY FOR
PREPARATORY WORK.
B
A
5A
in accordance with all state and local standards.
with water to overflow and operate pump for 5 minutes. Check for leaks carefully both while pump is running and
has been turned off. Allow water to stand in tub for at least 30 minutes before draining. AQUATIC INDUSTRIES,
INC. WILL NOT BE RESPONSIBLE FOR WATER DAMAGE OF ANY KIND IN CONNECTION WITH ONE OF
OUR WHIRLPOOL BATHS.
PLUMBING: