Filter
Top Products
Aquatic Industries, Inc.
19
ELECTRONIC CONTROL PANEL :
1. To Turn Air Bath System On: Pressing the on/off button
will illuminate when the system is on. The blower and the
heater will automatically shut off after a 20-minute period.
2. To Change Modes: Pressing the mode button alternates
the blower modes of operation from constant mode to
wave mode and then to pulse mode.
Constant Mode: Consists of a constant blower level with
Wave Mode: Consists of a gradual change of blower level to generate a gentle massage effect. The light indicator
will also follow the blower intensity.
Pulse Mode: Consists of an instant change of the blower level to generate a massage effect. The light indicator
will also pulse as the blower does.
3. To Change Speeds:
NOTE: In wave mode or
wave and pulse mode.
4. To Turn Chromatherapy Light On: Press the light button once to turn the Chromatherapy Light on in color wash
mode. A second press of the button will turn the lighting system off. Subsequent presses will move the lighting
system through the seven constant color modes.
CAUTION: Due to the varied size, weight and shape of a person’s body, water may splash out of the tub when the
air blower is on high speed. Turn the speed of the blower down using the minus button to a lower setting to
reduce the amount of water being dispersed from the tub.
AIR BATH PURGE CYCLE:
AUTOMATED DRY CYCLE:
Regardless if the air bath system was utilized, an automated dry cycle will turn on 20 minutes after the water
sensors do not detect water. The automated dry cycle will turn on for 3 minutes (once the sensors are dry)
The two water sensors are located near the drain.
OPERATION of
LUXEAIR with OPTIONAL CHROMATHERAPY
BATHSIDE CONTROL SYSTEMS:
On/Off
Button
Mode
Key
Speed
Increase
Speed
Chromatherapy
Light
Indicator
Light
11A