Filter
Top Products
© 2005 Alamo Group Inc.
Section 3 - 11
Switch Blade (JD-5105-5205-5225-5325-5425-5525, Asy. Man) 05/05
Figure 26
Suction
Port
Cyl - Valve
Pressure Port
Motor Pressure
Port
20. Pump Hose Connections. The pump hose connections should not be connected until later so
they will not be in the way. Leave all fittings on pump covered and sealed (See Figure 26), the fittings
are left covered and sealed to prevent them from getting contamination into hydraulic system. The
hose will be connected to pump in a later step. The Fittings should be installed onto the pump as
shown and in sequence as shown (See Figure 26).
Pump & Drive Shaft Installation:
Figure 25
Figure 23
Typical
Drive Shaft
7/8" x 13
Spline End
3/4" w/ 3/16"
Keyway End
P/N 02975188
Flex Coupler Asy.
Figure 24
Figure 23A
1
2
3
4
5
6
Pump Fittings (Figure 26)
Item Part No. Qty Description
1. 02975187 1 Adapter, Elbow 12MB-8ML45
2. 02968850 1 Adapter, Straight 8MB-6MJ
3. 02975186 1 Adapter, Straight 16MB-12FP
4. 0022400 1 Adapter, Elbow 12MP-12FP90
5. 000849 1 Adapter, Elbow, 12MP-12FP45
6 0222100 1 Hose Bib, #16 Hose - 12MP