Filter
Top Products
ASSEMBLY
Eagle 20 03/09 Assembly Section 3-10
© 2009 Alamo Group Inc.
ASSEMBLY
Chain Guard Attachment
CHAIN GUARDS: Front and Rear Chain Guards (Optional Equipment at extra cost) are recommended for
higher than normal usage (100 hours or more per year) and will provide protection from thrown objects with
careful operation. Chain Guards must be maintained in good repair by replacing missing or worn sections or by
replacing completely when worn or damaged.
The placement of the Chain Guards corresponds to the Rubber Deflector Attachment with the exception of the
Front Center Section see FIGURE Asm-R-0122&0133. Attach all Chain Guards with bolts and locknuts
specified in the parts list.
Single Chain Guards
Attach Chain bracket(1) to deck with 1/2" x 1-1/2"
bolt (5), washer (3), and locknut (4),. see.FIGURE
Asm-R-0133.
Double Chain Guards
Attach chain brackets (1) & (6) to deck with 1/2" x 3-
1/4" bolt (5), washer (3), and locknut (4), and
spacer (2) see.FIGURE Asm-R-0122.