Filter
Top Products
ASSEMBLY
Eagle 20 03/09 Assembly Section 3-5
© 2009 Alamo Group Inc.
ASSEMBLY
Center Section
Level Lift Axle Attachment (Figure Asm-R-0017 )
Attach the Center Level Lift Axle (1) to the Center Section (2) with the Center Pins (3), Bolts (4), and Nuts (5).
The Wing Level Lift Axles (6,7) are attached to the Wing Sections (8,9) with the Wing Pins (10), Bolts (4) and
Nuts (5). Install the Grease Fittings (11) on the ends of the Wing Pins, and on the bearings of the Center
Section Axle (1)
To attach an axle to a section:
1 . Align the axle tube pivots in the hinge area on the section.
2 . Insert the Pin thru the hinge plate, the tube pivot and make it come to rest on the other hinge plate
3 . Turn the Pin to align to the bolt hole as necessary and attach with nut and bolt
4 . Note the lube points on the Hinge pins and lubricate as per the Maintenance Section.