Agri-Fab 45-04072 Yard Vacuum User Manual


  Open as PDF
of 28
 
13
1/4" x 3/4"
HEX BOLT
1/4"
NYLOCK
NUT
1/4"
WASHER
1/4"
WASHER
1/4" x 1"
HEX BOLT
#10-32 x 5/8"
TRUSS BOLT
ROPE
SECURE
ROPE
KNOT
#10-32
NYLOCK
NUT
CLIP
11. Place the top angle support and cart bag ontop of the
cartasshowningure27.Then,usingascrewdriver
orothersharpobject,pokeholesthroughthecartbag
for the bolts that will be assembled in step 12.
12. Attach the top angle support and braces to the cart using
seven 1/4" x 3/4" hex bolts, fourteen 5/16" washers (one
placedoneachside)andseven1/4"nylocknuts.DO
NOT TIGHTEN YET.Seegure27.
NOTE: Cart bag not shown for clarity.
FIGURE 27
13. Slide each end of the rope through the holes in the
tailgateshowningure28.
14. Tieaknotintheendofeachsideoftheropetosecure
theropeinplace.Keepknotloose.Seegure28.
HINT:Knotmayneedtobemovedupordowninropeto
secure tailgate. See step 18 for more information.
15. Slide tailgate into tailgate guides.
16. Attach clips to 3rd lower support rod and fasten them
to the tailgate using two #10 x 5/8" slotted head bolts
and#10nuts.Seegure28.
17. TIGHTEN all bolts assembled in steps 7 through 12.
18. Securetailgateropearoundtheboltsshowningure
28.Ifropedoesnotkeeptailgatehelddownorrope
istooshorttosecurearoundbolts,movetheknotup
the end of the rope to loosen or down to tighten. Once
knotisindesiredlocation,tightentheknottosecureit
in place.
NOTE: Cart bag not shown for clarity.
FIGURE 28
While performing the assembly operations
in step 11, make sure the cart bag is between
the top angle support and the cart.
 previous next