Agri-Fab 45-04072 Yard Vacuum User Manual


  Open as PDF
of 28
 
10
29. Assemble the hitch plate to the tractor hitch if:
a. Your tractor has a square (straight) hitch frame,
to help prevent binding.
b. Your tractor has a lightweight hitch frame that
needs reinforcement for towing.
Usea1/2"x1-1/2"hexbolt,a7/16"atwasheranda
1/2"locknut.Seegure18.
FIGURE 18
25" TARP
STRAP
HOSE HANGER ROD
28. Loopthe25"tarpstrapunderthehose.Fastenthehooks
tothehosehangerrod.Seegure17.
FIGURE 17
CLAMP
HOSE
HOSE ADAPTER
(NOZZLE)
26. Place a hose clamp onto the end of the hose. Push the
hose onto the hose adapter (nozzle). Tighten the hose
clamp onto the hose and hose adapter. Do not collapse
the hose adapter when tightening the clamp. See
gure16.
27. The remaining hose clamp will be used later to fasten
thehosetothedeckadapter.
FIGURE 16
TRACTOR HITCH
FRAME (SQUARE)
HITCH
PLATE
TRACTOR HITCH
FRAME (TAPERED)
1/2" x 1-1/2"
HEX BOLT
7/16" FLAT WASHER
1/2" LOCK NUT
ATTACH
MOW-N-VAC
HERE
 previous next