Filter
Top Products
Spectrum Analyzer Specifications (Option 102)
274
Adjacent Channel Power
(Included with Option 102)
Relative Measurements:
Level Range:
Antenna In: −40 dBm to +20 dBm
RF/Input: 0.16 mW (−8 dBm) to 60 W (47.8 dBm) continuous; or
up to 100 mW (50 dBm) for 10 seconds/minute
Dynamic Range: Typical values for channel offsets
Relative Accuracy: ±2.0 dB
Absolute Level Measurements:
Level: Results of absolute power in Watts or dBm are met by adding the
ACP ratio from the spectrum analyzer to the carrier power from the in-
put section RF power detector.
Level Range:
Antenna: Not applicable
RF/Input: 1 mW (0 dBm) to 60 W (47.8 dBm) continuous; or up to
100 W
(50 dBm) for 10 seconds/minute
Dynamic Range: Typical values for channel offsets
Table 5
Channel
Offset
Resolution
Bandwidth
Dynamic
Range
12.5 kHz 8.5 kHz − 65 dBc
20 kHz 14 kHz − 68 dBc
25 kHz 16 kHz − 68 dBc
30 kHz 16 kHz − 68 dBc
60 kHz 30 kHz − 65 dBc