Filter
Top Products
Using the Oscilloscope
238
Measurements Using the Main Control Fields:
• Vert/div selects the vertical amplitude per division.
Units for this field are in Volts, kHz, or percent depending on the AF Anl
In selection.
• Vert Offset moves the displayed signal above or below the center graticule
line.
• Time/div selects the horizontal sweep time per division.
Indicators:
• Input source is displayed in the lower left corner of the display.
•Marker Time ms changes the units that the marker position is displayed
in. Displayed value is the time elapsed from the trigger point to the cur-
rent position.
•Marker Lvl V/kHz/% changes the units that the marker position is dis-
played in. Displayed value is the signal level at the current position.