A SERVICE OF

logo

Open as PDF
next previous
6
Troubleshooting
6-20
Phaser 300X Color Printer
Network problems
The printer doesn’t appear in the Chooser.
The printer is turned on with the
cables correctly attached. Check the termination (refer to the documentation
for your Ethernet adapter or LocalTalk connector for information on
termination).
Select the correct zone in the Chooser before looking for the printer’s name
in the list of printers. If you have changed the printer’s name, did you make
it a unique name (not the same as any other printer in the zone)? Check the
configuration page to get the zone name and printer name. Refer to
“Generating a configuration page” on page A-2.
Make sure that the appropriate network interface (LocalTalk or EtherTalk)
has been selected for the Macintosh and that you are using the most current
network software (available from Apple).