Hurricane 9200/S ADSL Ethernet Router User’s Guide
96
The DHCP server distributes addresses to computers connected to
one of its interfaces only when that interface is in the same subnet
as the pool addresses. In the examples shown above, the IP
addresses in pool 0 would be assigned only over the Ethernet and
USB interfaces, and the addresses in pool 1 would only be
assigned only over the Wireless LAN interface.
%""!%""
Follow these instructions to create an IP address pool:
1. Log into Configuration Manager, click the LAN tab, and then
click
in the task bar.
The DHCP Server Configuration page displays:
Figure 34. DHCP Configuration Page
Depending on your preconfigured settings, the table may
display up to two address pools, each in a row, or may be
empty.
2. Click .
The DHCP Server Pool – Add page displays:
Figure 35. DHCP Server Pool – Add Page
