Hurricane 9200/S ADSL Ethernet Router User’s Guide
54
interface will accept. Packets larger than this size will be
dropped.
5. Click .
If you changed the USB interface IP address while working
from the USB-attached computer, then the connection will
be terminated.
If you were using the Ethernet interface, a page will display
to confirm your change and your connection will remain
active.
6. If necessary, reconfigure your USB PC so that its IP address
places it in the same subnet as the new IP address of the
USB interface. See “Quick Start Part 2 — Configuring Your
Computers,” for instructions.
7. Log into Configuration Manager by typing the new USB
interface IP address in your Web browser’s address/location
box.
8. If you want the changes to be permanent, follow the
instructions on page 45 to commit them.
