Chapter 5. Configuring WAN Interfaces
73
10. Click to return to the IPoA page and view the new
interface in the table.
IPoA interfaces must be mapped to a lower ATM VC interface
before they can be used. Follow these instructions to map and IPoA
interface to an ATM VC:
11. In the IPoA interface table, click in the row
corresponding to the IPoA interface you want to map.
The IPoA Map Information page displays:
Figure 26. IPoA Interface – Map Page
12. From the Lower Interface drop-down list, select the ATM VC
interface you want to map the IPoA interface to, and then
click .
13. Click to return to the IPoA Configuration page.
14. If you want the changes to be permanent, follow the
instructions on page 45 to commit them.
To view all IPoA-to-ATM VC interface mappings, click at the
bottom of the IPoA Configuration page (not in the table). The IPoA
Interface – Global Map displays:
Figure 27. IPoA Interface – Global Map Page
You can click in the Action column to delete an IPoA mapping.
The IPoA interface itself is not deleted.
