Hurricane 9200/S ADSL Ethernet Router User’s Guide
42
8",+*,
You can modify the system date and time. You can also assign a
name to the Hurricane 9200/S and to the network domain in which it
resides.
8","
You can set the system date and time manually.
When you set the date and time manually, the information
will be held only as long as the device stays on; if power is
turned off or you reboot, the date and time revert to default
values and must again be updated.
Note
Setting the Hurricane 9200/S date and time manually, does not
affect the date and time on your PCs.
Follow these instructions to change the system date and time:
1. At the bottom of the Home page, click .
The System - Modify page displays in a separate browser
window:
Figure 11. System - Modify Page
2. Modify the fields on this page as required. The following
table describes each field:
Option Description
SNTP Status
Shows the current status of SNTP Client
(Enabled/ Disabled). SNTP Client can be
enabled from WAN->SNTP Page.
