Hurricane 9200/S ADSL Ethernet Router User’s Guide
164
)'85%
You can enable access to Configuration Manager via the WAN port
so that the ISP can perform configuration tasks.
To enable WAN access, display the Management Control page by
clicking $!$$ in the Admin tab.
Figure 70. Management Control Page
The table on this page provides a check box to enable or disable
HTTP (i.e., Web browser-based) access to the configuration
program through the WAN port. In the Inactivity TimeOut text box,
you can specify a length of time in minutes after which external
access will be blocked, assuming that there is no access during that
time.
If you want your changes to be in effect the next time you log in,
click .
If you want the changes to be permanent, follow the instructions on
page 45 to commit them.
