Filter
Top Products
50
English
7. MAINTENANCE
3. Keep pressing the starting pump in
the carburetor until no more fuel
comes out, and then transfer the
fuel that has returned to the fuel
tank to a vessel.
4. Place the fuel filter back into the
fuel tank, and mount the fuel tank
cap.
5. Start the engine and run it until it
naturally stops.
6. Remove the spark plug, and pour
1 to 2 ml of 2-cycle oil into the
engine. Draw the starter rope two
to three times, set the plug back,
and stop it at the contraction
position.
7. Supply some grease to the gear
case, and apply anti-rust oil to the
metal parts such as the throttle
wire.
8. Apply a little oil to the blade, put
the cover on the blade, and keep
the machine in a safe place away
from heat and humidity.
Store the flexible shaft as straight as
possible.
NOTE
7.스로틀 와이어 등의 금속부에 방청
유를 바른 후, 칼날에 커버를 씌우
고, 실내의 화기나 습기가 없는 장
소에 시트 등을 덮어서 보관해 주십
시오.
8.플랙시블 샤프트는 가능하면 똑바
로 직선으로 하여 보관해 주십시오.
플랙시블 샤프트는 가능한 한 똑바로
펴서 보관해 주십시오.