Filter
Top Products
15
3. SAFETY PRECAUTIONS
■ NOTES ON STARTING THE
ENGINE
1. Take a careful look around to
make sure that no obstacles exist
within a perimeter of 15m or less
around the product.
2. Place the body of the product onto
the ground in a flat clear area and
hold it firmly in place so as to
ensure that neither the blades nor
the throttle come into contact with
any obstacles when the engine
starts up.
3. Place the throttle into the idling
position when starting the engine.
4. After starting up the engine, if the
blades continue to rotate even
after the throttle has been moved
fully back, turn off the engine and
check the throttle wire and other
parts.
■
KICKBACK SAFETY PRECAUTIONS
•A dangerous reaction may occur
when the spinning blade contacts
a solid object in the critical area. It
is called Kick back. As a result, the
operator can lose control of the
unit which can cause serious or
fatal injury.
Avoid kickback, observe the safety
precautions below strictly.
1. Keep the cutting blades clear of
fances, posts, wires, and rocks to
prevent kickback and damage to
the blades.
2. When using your product, do not
grip other parts except the
handles.
3. When using your product, never
take your eyes off. If you need to,
place the throttle into the idling
position.
4. When using your product, do not
let the unit get closer to your feet
nor raise the unit above your
waist.
English