Zenoah BK2650DL-Hb Brush Cutter User Manual


 
32
English
6. OPERATION
REFUELING
Refuel the fuel tank in a flat
place outdoors. Avoid smoking
or bringing any flame or spark
near the fuel, and stub out any
cigarette.
When refueling the fuel tank
while using this machine, make
sure to stop the engine and
allow it to cool before refueling
the fuel tank.
Make sure to tighten the fuel-
tank cap firmly.
Wipe up all fuel spills with a dry
cloth before starting the engine.
Fill the fuel tank to roughly 80% of its
capacity.
If filled too full, the fuel may leak from
the tank cap while using this
machine.
1. Place the brushcutter to be
refueled in a flat place outdoors,
and make sure it is stable.
2. Unscrew the fuel-tank cap a little,
and allow the difference of
atmospheric pressure between the
inside and outside of the fuel tank
to equalize.
3. Remove the fuel-tank cap, and fill
fuel little by little up to roughly
80%.
4. After filling the fuel, close the fuel-
tank cap tightly, and make sure
that the fuel does not leak.
(1) Tank cap
(2) Fuel tank
IMPORTANT
WARNING
OP1
■급유
●연료 탱크에 급유할 때는 실외의 평
평한 장소에서 실시해 주십시오. 급
유시는 화기를 멀리하고 담배불은
꺼 주십시오.
●작업 도중에 급유할 경우에는, 반드
시 엔진을 끄고 식은 다음 실시해
주십시오.
●연료 뚜껑은 확실하게 조여 주십시
오.
●급유시에 흘린 연료는 엔진을 시동
하기 전에 걸레로 잘 닦아 주십시
오.
●연료 탱크에 급유할 때는 흘리지 않
도록 해 주십시오.
●연료를 너무 많이 넣으면 운전시 캬
뷰레터로부터 새어 나올 우려가 있
습니다.
1.급유할 예초기를 실외의 평탄한 장
소에 놓아 주십시오.
2.연료탱크 뚜껑을 약간 느슨하게 하
여, 연료탱크 내부와 외부와의 압력
차를 제거해 주십시오.
3.연료탱크의 뚜껑을 열고, 흘리지
않도록 하여 조금씩 급유해 주십시
오.
4.급유가 끝나면 탱크 뚜껑을 확실하
게 조여서 연료가 흘러 나오지 않는
것을 확인해 주십시오.
(1)뚜껑
(2)연료탱크