Zenoah BK2650DL-Hb Brush Cutter User Manual


 
22
English
4. SET UP
(7) Socket (AC220 V)
(8) Jack
(9) Charging/CHARGE
From turning on (red) to
turning off
(10) Power supply/POWER
Turning on (red)
Be sure to charge the battery at least
2 m away from any audiovisual
equipment such as a television or
radio to prevent any noise
interference with the AC adapter.
[Confirming charging]
The “Charging/CHARGE” indicator
lamp changes according to the
charging status. When charging is
completed, the lamps will turn off.
The battery takes about four hours to
charge from empty to fully charged.
5. When charging is completed,
unplug the AC adapter from the
household power-supply outlet,
and remove the battery from the
charger.
6. Connect the connector using the
procedure opposite to the one for
disconnecting the connector.
Make sure that the connector is firmly
connected and the rubber cover does
not turn up.
IMPORTANT
NOTE
NOTE
Charging
status
Under
charging
Charging is
completed
Lamp indication
Power supply/
POWER
Turned on (red)
Turned on (red)
Charging/
CHARGE
Turned on (red)
Turned off
잡음이 생길 수 있으므로 텔레비젼이
나 라디오 등의 AV기기에서 2m이상
떨어진 곳에서 충전해 주십시오.
[충전의 확인]
「충전/CHARGE」램프는 밧데리의
충전상태에 따라 표시가 바뀝니다. 램
프가 꺼지면 충전완료입니다.
밧데리가 방전상태에서 충전완료되기
까지 걸리는 시간은 약 4시간입니다.
5.충전이 완료되면 AC어뎁터를 콘센
트에서 뽑아 주십시오.
6.커넥터를 뽑는 순서의 역순으로 꽂
아 주십시오.
확실이 접속되어 있는지, 고무커버가
젖혀져 있지 않은지 확인해 주십시오.
점등(적색) 점등(적색)
충전
상태
램프표시
전원/POWER 충전/CHARGE
충전
충전
완료
점등(적색) 소등