Filter
Top Products
10
31
SAFETY INSTRUCTIONS (continued)
Stop mower and tractor immediately upon striking an obstruction. Turn engine off, remove key, inspect and
repair any damage before resuming operation.
The mower discharge deflectors, belt guards, driveline and gearbox shields should be used and maintained in
good working condition. They should be inspected carefully at least daily. Missing, broken or worn items must
be replaced at once and before operating mower to reduce the possibility of injury from thrown objects or
entanglement.
Use extreme care and maintain minimum ground speed when transporting on hillside, over rough ground and
when operating close to ditches or fences. Be careful when turning sharp corners.
Reduce speed on slopes and sharp turns to minimize tipping or loss of control. Be careful when changing
directions on slopes. Do not start or stop suddenly on slopes. Avoid operation on steep slopes.
When using a unit, a minimum 20% of tractor and equipment weight must be on tractor front wheels. Without
this weight, tractor could tip over, causing personal injury or death. The weight may be attained with a front
end loader, front wheel weights, ballast in tires of front tractor weights. When attaining a minimum 20% of trac-
tor and equipment weight on the front wheels, you must not exceed the ROPS weight certification. Weigh the
tractor and equipment. Do not guess or estimate!
Inspect the entire machine periodically as indicated in the Maintenance Section of this manual. Look for loose
fasteners, worn or broken parts, pinched hydraulic hoses, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.
Stay alert for holes, rocks, stumps and roots in the terrain and other hidden hazards. Keep away from
drop-offs.
In extremely uneven terrain, tractor rear wheel weights, front tractor weights, and/or tire ballast should be used
to improve stability.
Be careful when operating tractor and mower on uneven ground to avoid upsetting.
Pass diagonally through sharp dips and avoid sharp drops to prevent “hanging up” tractor and cutter. Practice
will improve your skills in maneuvering rough terrain.
Avoid sudden starts and stops while traveling up or downhill.
Always cut down slopes; never across the face. Avoid operation on steep slopes. Slow down on sharp turns
and slopes to prevent tipping and/or loss of control.
OPERATIONAL SAFETY (continued)
GENERAL MOWER ASSEMBLY
ITEM PAGE NO. DESCRIPTION
1 32 3-Point lift assembly
2 34 Gearbox assembly
3 32 Shield assembly
4 32 Belt assembly
5 32 Blade and spindle assembly
6 32 Spindle and housing assembly
7 32 Wheel and axle assembly