Filter
Top Products
WATLOW Series 988 User’s Manual 6.9
Factory Menus, Chapter 6
Factory-Diagnostics
[acnt]
[`gnd]
[cnt1]
[cnt2]
Factory Use Only
These prompts are used only at the factory.
[Acnt] [`gnd] [cnt1] [cnt2] These prompts always appear.
Inputs 1 and 2 Module Types
Displays which input module is installed in the controller. Please doc-
ument this value before contacting the factory for technical assistance.
Input Types
• [none] No input module
• [``tc] Thermocouple only module
• [Curr] Current detect
• [SLid] Slidewire module
• [UOFF] Universal off
• [Urtd] Universal rtd
• [Utch] Universal high-gain thermocouple
• [UtcL] Universal low-gain thermocouple
• [UMu] Universal millivolts
• [UPrc] Universal process
• [`Ei2] Event input 2
[ity1] [ity2] These prompts always appear.
[ity1]
[ity2]
C6.wc 5/14/1999 8:52 AM Page 6.9